{"title":"Victron - Battery Isolators","description":"","products":[{"product_id":"victron-argo-diode-battery-isolator-160amp-2-batteries","title":"Victron Argo Diode Battery Isolator - 160AMP - 2 Batteries","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eArgo Diode Battery Isolator - 160AMP - 2 Batteries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDiode battery isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery. The Argo Battery Isolators feature a low voltage drop thanks to the use of Schottky diodes: at low current the voltage drop is approximately 0,3 V and at the rated output approximately 0,45 V. All models are fitted with a compensation diode that can be used to slightly increase the output voltage of the alternator. This compensates for the voltage drop over the diodes in the isolator.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:mm5umpRr ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/82889OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/brochure\/82889BR.pdf\" target=\"_blank\"\u003eBrochure (pdf)\u003c\/a\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45110791373056,"sku":"ARG160201020-VIC","price":90.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/9044\/4032\/files\/82889XL.jpg?v=1715083637"},{"product_id":"victron-argo-fet-battery-isolator-100amp-2-batteries","title":"Victron Argo FET Battery Isolator - 100AMP - 2 Batteries","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eArgo FET Battery Isolator - 100AMP - 2 Batteries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSimilarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:mm5umpRr ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/82890QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/brochure\/82890BR.pdf\" target=\"_blank\"\u003eBrochure (pdf)\u003c\/a\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45110791471360,"sku":"ARG100201020-VIC","price":100.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/9044\/4032\/files\/82890XL.jpg?v=1715083645"},{"product_id":"victron-argo-fet-battery-isolator-200amp-2-batteries","title":"Victron Argo FET Battery Isolator - 200AMP - 2 Batteries","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eArgo FET Battery Isolator - 200AMP - 2 Batteries\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSimilarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:mm5umpRr ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/82891QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/brochure\/82891BR.pdf\" target=\"_blank\"\u003eBrochure (pdf)\u003c\/a\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45110791536896,"sku":"ARG200201020R-VIC","price":119.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/9044\/4032\/files\/82891XL.jpg?v=1715083655"},{"product_id":"victron-argo-fet-battery-isolator-200-3-3-batteries-200amp","title":"Victron Argo FET Battery Isolator 200-3 3 Batteries - 200AMP","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eArgo FET Battery Isolator 200-3 3 Batteries - 200AMP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSimilarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.victronenergy.com\/upload\/documents\/20150209_Warranty_final_en.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eWarranty Info\u003c\/a\u003e\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:mm5umpRr ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/85115QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/85115OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/brochure\/85115BR.pdf\" target=\"_blank\"\u003eBrochure (pdf)\u003c\/a\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45111086678272,"sku":"ARG200301020-VIC","price":140.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/9044\/4032\/files\/85115XL.jpg?v=1715091752"},{"product_id":"victron-galvanic-isolator-vdi-32a-32a-max-waterproof-potted","title":"Victron Galvanic Isolator VDI-32A 32A Max Waterproof (Potted)","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGalvonic Isolator VDI-32A 32A Max Waterproof (Potted)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe galvanic isolator prevents electrolytic corrosion. It blocks low voltage DC currents that enter your boat via the shore power earth wire. These currents can cause corrosion to the boat’s underwater metals, like the hull, propeller, shaft and so on.\u003cbr\u003eThe galvanic isolator consists internally of two diodes which are connected in anti-parallel fashion. When they are connected in this way, the diodes allow current in both directions but only above a certain threshold voltage. The voltage at which diodes conduct is about 1.4 Vdc.\u003c\/p\u003e\u003cp\u003eThe isolator is installed directly behind your boat's 120V - 230V connection. The forward voltage from the galvanic isolator is higher than the potential difference between metals. As a result, this voltage will not allow conduction and as such, the galvanic isolator will prevent any electrolytic current. However, if there is a (higher) error voltage in the AC circuit, the diodes will allow current through and the residual-current device will break the circuit.\u003c\/p\u003e\u003cp\u003eTerminal posts are 6mm (1.4\")\u003c\/p\u003e\u003cp\u003eThis item is not ABYC A-28 approved\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:mm5umpRr ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/85481QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/85481OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45111219421440,"sku":"GDI000032000-VIC","price":249.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/9044\/4032\/files\/85481XL.jpg?v=1715092956"},{"product_id":"victron-galvanic-isolator-vdi-64a-64a-max-waterproof-potted","title":"Victron Galvanic Isolator VDI-64A 64A Max Waterproof (Potted)","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGalvanic Isolator VDI-64A 64A Max Waterproof (Potted)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe galvanic isolator prevents electrolytic corrosion. It blocks low voltage DC currents that enter your boat via the shore power earth wire. These currents can cause corrosion to the boat’s underwater metals, like the hull, propeller, shaft and so on.\u003cbr\u003eThe galvanic isolator consists internally of two diodes which are connected in anti-parallel fashion. When they are connected in this way, the diodes allow current in both directions but only above a certain threshold voltage. The voltage at which diodes conduct is about 1.4 Vdc.\u003c\/p\u003e\u003cp\u003eThe isolator is installed directly behind your boat's 120V - 230V connection. The forward voltage from the galvanic isolator is higher than the potential difference between metals. As a result, this voltage will not allow conduction and as such, the galvanic isolator will prevent any electrolytic current. However, if there is a (higher) error voltage in the AC circuit, the diodes will allow current through and the residual-current device will break the circuit.\u003c\/p\u003e\u003cp\u003eTerminal posts are 6MM (1\/4\")\u003c\/p\u003e\u003cp\u003e\u003cem\u003eThis item is not\u003c\/em\u003e\u003cem\u003e ABYC A-28 approved\u003c\/em\u003e\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:mm5umpRr ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/85483QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/85483OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45111221354752,"sku":"GDI000064000-VIC","price":305.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/9044\/4032\/files\/85483XL.jpg?v=1715092973"},{"product_id":"victron-argofet-battery-isolator-100-3-3-batteries-100amp","title":"Victron Argofet Battery Isolator 100-3 3 Batteries - 100AMP","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eArgofet Battery Isolator 100-3 3 Batteries - 100AMP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSimilarly to Argodiode battery isolators, Argofet isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. In contrast with Argodiode battery isolators, Argofet isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents. \u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:mm5umpRr ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/96504QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/brochure\/96504BR.pdf\" target=\"_blank\"\u003eBrochure (pdf)\u003c\/a\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45126419841280,"sku":"ARG100301020R-VIC","price":114.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/9044\/4032\/files\/96504XL.jpg?v=1715201333"},{"product_id":"victron-galvanic-isolator-vdi-16a-16-amp-max-waterproof-potted","title":"Victron Galvanic Isolator VDI-16A, 16 AMP Max Waterproof Potted","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGalvanic Isolator VDI-16A, 16 AMP Max Waterproof Potted\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe galvanic isolator prevents electrolytic corrosion. It blocks low-voltage DC currents that enter your boat via the shore power earth wire. These currents can cause corrosion to the boat’s underwater metals, like the hull, propeller, shaft, and so on.\u003c\/p\u003e\u003cp\u003eThe galvanic isolator consists internally of two diodes which are connected in an anti-parallel fashion. When they are connected in this way, the diodes allow current in both directions but only above a certain threshold voltage. The voltage at which diodes conduct is about 1.4 Vdc.\u003c\/p\u003e\u003cp\u003eThe isolator is installed directly behind your boat's 120V - 230V connection. The forward voltage from the galvanic isolator is higher than the potential difference between metals. As a result, this voltage will not allow conduction and as such, the galvanic isolator will prevent any electrolytic current. However, if there is a (higher) error voltage in the AC circuit, the diodes will allow current through and the residual-current device will break the circuit.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:mm5umpRr ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/ownersManual\/98884OM.pdf\" target=\"_blank\"\u003eOwner's Manual (pdf)\u003c\/a\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":45128098414848,"sku":"GDI000016000-VIC","price":109.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/9044\/4032\/files\/98884XL.jpg?v=1715213306"},{"product_id":"victron-argodiode-battery-isolator-80-2ac-2-batteries-80a","title":"Victron Argodiode Battery Isolator 80-2AC - 2 Batteries - 80A","description":" \u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eArgodiode Battery Isolator 80-2AC - 2 Batteries - 80A\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArgodiode Battery Isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries. Discharging the accessory battery for example will not result in also discharging the starter battery. Low voltage drop due to the use of high-efficiency Schottky diodes.\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eThe Argo Battery Isolators feature a low voltage drop thanks to the use of Schottky diodes: at low current, the voltage drop is approximately 0,3 V, and at the rated output of approximately 0,45 V. All models are fitted with a compensation diode that can be used to slightly increase the output voltage of the alternator. This compensates for the voltage drop over the diodes in the isolator. \u003c\/p\u003e\u003cp\u003eSimply inserting the isolator in the cabling between the alternator and the batteries will slightly reduce charge voltage. The result can be that batteries are not charged to the full 100% and age prematurely. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAlternator energize input \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSome alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage\/current from the batteries to the B+, and the alternator will not start. The new ‘AC’ diode isolators feature a special current limited energize input that will power the B+ when the engine run\/stop switch is closed.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:mm5umpRr ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":46060372852992,"sku":"ARG080201000-VIC","price":50.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/9044\/4032\/files\/106480XL.jpg?v=1730815626"},{"product_id":"victron-argodiode-battery-isolator-80-2sc-2-batteries-80a","title":"Victron Argodiode Battery Isolator 80-2SC - 2 Batteries - 80A","description":" \u003cp\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003e\u003cstrong\u003eArgodiode Battery Isolator 80-2SC - 2 Batteries - 80A\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArgodiode Battery Isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries. Discharging the accessory battery for example will not result in also discharging the starter battery. Low voltage drop due to the use of high-efficiency Schottky diodes.\u003c\/p\u003e\u003cp\u003eThe Argo Battery Isolators feature a low voltage drop thanks to the use of Schottky diodes: at low current, the voltage drop is approximately 0,3 V, and at the rated output of approximately 0,45 V. All models are fitted with a compensation diode that can be used to slightly increase the output voltage of the alternator. This compensates for the voltage drop over the diodes in the isolator. \u003c\/p\u003e\u003cp\u003eSimply inserting the isolator in the cabling between the alternator and the batteries will slightly reduce charge voltage. The result can be that batteries are not charged to the full 100% and age prematurely. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAlternator energize input \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSome alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage\/current from the batteries to the B+, and the alternator will not start. The new ‘AC’ diode isolators feature a special current limited energize input that will power the B+ when the engine run\/stop switch is closed.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:mm5umpRr ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/106481QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":46060373246208,"sku":"ARG080202000-VIC","price":39.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/9044\/4032\/files\/106481XL.jpg?v=1730815634"},{"product_id":"victron-argodiode-battery-isolator-140-3ac-3-batteries-140a","title":"Victron Argodiode Battery Isolator 140-3AC - 3 Batteries - 140A","description":" \u003cp\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003e\u003cstrong\u003eArgodiode Battery Isolator 140-3AC - 3 Batteries - 140A\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArgodiode Battery Isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries. Discharging the accessory battery for example will not result in also discharging the starter battery. Low voltage drop due to the use of high-efficiency Schottky diodes.\u003c\/p\u003e\u003cp\u003eThe Argo Battery Isolators feature a low voltage drop thanks to the use of Schottky diodes: at low current, the voltage drop is approximately 0,3 V, and at the rated output of approximately 0,45 V. All models are fitted with a compensation diode that can be used to slightly increase the output voltage of the alternator. This compensates for the voltage drop over the diodes in the isolator. \u003c\/p\u003e\u003cp\u003eSimply inserting the isolator in the cabling between the alternator and the batteries will slightly reduce charge voltage. The result can be that batteries are not charged to the full 100% and age prematurely. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAlternator energize input \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSome alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage\/current from the batteries to the B+, and the alternator will not start. The new ‘AC’ diode isolators feature a special current limited energize input that will power the B+ when the engine run\/stop switch is closed.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:mm5umpRr ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/106482QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":46060373868800,"sku":"ARG140301020R-VIC","price":95.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/9044\/4032\/files\/106482XL.jpg?v=1730815643"},{"product_id":"victron-argodiode-battery-isolator-180-3ac-3-batteries-180a","title":"Victron Argodiode Battery Isolator 180-3AC - 3 Batteries - 180A","description":" \u003cp\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003e\u003cstrong\u003eArgodiode Battery Isolator 180-3AC - 3 Batteries - 180A\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eArgodiode Battery Isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries. Discharging the accessory battery for example will not result in also discharging the starter battery. Low voltage drop due to the use of high-efficiency Schottky diodes.\u003c\/p\u003e\u003cp\u003eThe Argo Battery Isolators feature a low voltage drop thanks to the use of Schottky diodes: at low current, the voltage drop is approximately 0,3 V, and at the rated output of approximately 0,45 V. All models are fitted with a compensation diode that can be used to slightly increase the output voltage of the alternator. This compensates for the voltage drop over the diodes in the isolator. \u003c\/p\u003e\u003cp\u003eSimply inserting the isolator in the cabling between the alternator and the batteries will slightly reduce charge voltage. The result can be that batteries are not charged to the full 100% and age prematurely. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAlternator energize input \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSome alternators need DC voltage on the B+ output to start charging. Obviously, DC will be present when the alternator is directly connected to a battery. Inserting a Diode or FET splitter will however prevent any return voltage\/current from the batteries to the B+, and the alternator will not start. The new ‘AC’ diode isolators feature a special current limited energize input that will power the B+ when the engine run\/stop switch is closed.\u003c\/p\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:mm5umpRr ---\u003e\u003cbr\u003e\u003ca href=\"https:\/\/productimageserver.com\/literature\/quickGuide\/106484QG.pdf\" target=\"_blank\"\u003eQuick Guide (pdf)\u003c\/a\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":46060374032640,"sku":"ARG180301020-VIC","price":109.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/9044\/4032\/files\/106484XL.jpg?v=1730815651"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0624\/9044\/4032\/collections\/logo-collection-victron_d825d388-b1f6-4730-af3e-f3eb82c63fc5.jpg?v=1760105685","url":"https:\/\/theyachtrigger.com\/collections\/victron-battery-isolators.oembed","provider":"The Yacht Rigger","version":"1.0","type":"link"}