Skip to main content

Modular Watermakers

Rainman Watermakers are ideal for installation, single motor configuration, hardware included. Take the stress and expense out of installation.

ORDER YOUR RAINMAN SYSTEM

INCLUDED

Complimentary Supply Kit

Your Rainman Watermaker will be delivered with a complimentary supply kit of consumables to cover your first few months of use, nothing more required,  everything is included.

All consumables are non proprietary, so you will be able to get stock locally, even without a dealer!

TWO COMPONENTS – ONE SYSTEM

The Rainman Watermaker consists of two components. The Pressure Supply Unit and the Reverse Osmosis Membranes. Both make a complete Rainman Watermaker desalination system.

PRESSURE SUPPLY UNIT (PSU)

The Pressure Supply Unit is easily selected based upon your power supply onboard – so in this case – AC or 12V. The PSU lifts the seawater, filters out dirt and sediment then puts the system under high pressure for operation. A set of membranes are connected to the PSU to extract drinking water from the seawater  – which is the basic operation of the system.

REVERSE OSMOSIS MEMBRANE

The membranes recieve the high pressure water from the Pressure Supply Unit and, using reverse osmosis, extract the drinking water from the seawater. The membranes will produce two ‘output’ streams – the first will be the ‘Brine’ or ‘Waste water’ – which you will discharge back into the ocean. The second stream the membranes produce is the ‘permeate’ or ‘fresh water’ stream.

PRESSURE SUPPLY UNITS (PSU)

115V INSTALLATION PSU

115V Installation Pressure Supply Units are designed to operate drawing around 12A/1250 watts in steady state power consumption. A 2KvA generator or high quality inverter is often used with this configuration.

230V INSTALLATION PSU

230V Installation Pressure Supply Units draw approx 6 amps – around 1250 watts steady state power consumption. A 2KvA generator or high quality inverter is often used with this configuration. Your preferred plug can be selected upon order.

DC12V INSTALLATION PSU

12V DC Pressure Supply Units require around 30 amps to operate – around 410 watts. The Rainman system is ideal for folks wanting to avoid the complexities and maintenance of more efficient energy recovery systems.

MEMBRANE OPTIONS

HIGH OUTPUT

The installation high output membrane is the flagship model – designed specifically for the Rainman Installation Pressure Supply Units. With the High Output membrane, you can expect to produce between 26 – 37 GPH. This is our most popular and highest output option.

COMPACT

An ideal companion for the electric PSU if you are short on space, and do not require the higher output that the High Output membrane provides. This compact membrane, together with the Rainman Installation Electric PSU is capable of producing between 13 – 18 Gallons Per Hour.

ECONOMY

The most economical companion to the Electric PSU. With the Economy Membrane, you can expect production rates between 13 – 18 Gallons Per Hour*. This is also the only membrane compatible with the 12V DC Rainman system (*7-9 GPH at 12V)

ORDER NOW
SYSTEM SELECTION GUIDE

How can we help you?

Contact Us