Rugged and IP certified sensor for temperature, humidity and acceleration monitoring
RuuviTag Pro is an environmental sensor that fits perfectly with the demanding of industrial, home and recreational needs. Built and tested to last, maintaining accuracy even under harsh conditions.
RuuviTag Pro is based on its historically successful concept and design, bringing several new outstanding features to the table with the Pro. RuuviTag Pro, the rugged open source Ruuvi sensor you’ve been waiting for.
Available in two versions
RuuviTag Pro 2in1 Waterproof
RuuviTag Pro 3in1 Breathable
Air humidity sensors
PRO FEATURES ONLY
No compromises made on the RuuviTag Pro.
- PROVEN TECHNOLOGY
Based on RuuviTag’s radio technology trusted by over 5000 business customers.
- MULTIPLE SENSORS
Temperature, air humidity and acceleration.
- WIDE OPERATING RANGE
Supports -40 to +85 °C range.
- IP CERTIFIED
Laboratory tested and certified for IP67, IP68 and IP69K.
- TEMPERATURE ACCURACY
Absolute temperature measurement accuracy ±0,1 °C. 0,01 °C resolution.
- HUMIDITY ACCURACY
Typical absolute accuracy tolerance ±2 % (20…80 % relative humidity, 25 °C).
- OPEN SOURCE
Firmware and hardware are fully open source.
- RUGGED ENCLOSURE
Durable enclosure with good mounting options.
- LONG LASTING BATTERY
Up to 2 years with a single user-replaceable CR2477T battery (included).
- EXPANSION PORT
Ruuvi Connector expansion system for external sensors.
RuuviTag Pro tolerates wet and rough conditions.
The IP68 and IP69K certified RuuviTag Pro (2-in-1) offers a full protection against water with its fully sealed enclosure. It has been laboratory tested to work in water depth of up to 50 meters for 24 hours and to tolerate high pressurised spraying with 80 °C water.
The IP67 certified RuuviTag Pro (3-in-1) comes with a breathable membrane that enables air humidity monitoring. It tolerates temporary wet conditions.
Medical Grade Temperature Accuracy
RuuviTag Pro has an extremely accurate temperature sensor on board. The sensor is designed to meet ASTM E1112 and ISO 80601 requirements for electronic patient thermometers.
Measurement resolution is 0,01 °C, while absolute accuracy is astounding at ±0,1 °C across the temperature range of –20 to +50 °C, with no calibration.
The sensor units are 100% tested on a production setup that is NIST traceable and verified with equipment that is calibrated to ISO/IEC 17025 accredited standards.
RuuviTag Pro has two strong mounting ears that allow reliable installation methods to be used. Wooden ceilings, gyproc walls, concrete foundations, you name it. Attach and measure professionally wherever you need to.
-40 to 85°C
RuuviTag Pro’s casing and electronics are designed to operate without interruption in a wide range of temperatures. Maintenance is minimal because the included Ruuvi CR2477T wide temperature battery lasts up to 2 years.