The Yacht Rigger provides comprehensive rigging inspections on all masts to vessels located within our service area. We inspect all running and standing rigging. All rigging termination points are visually inspected. Sheave pins and sheaves inspected, spreaders, furler or headsail foils, and all gooseneck fittings. Electrical wiring is inspected for chafe/corrosion.
We also check all light fittings, blocks, cars, tracks, clutches, winches and any other hardware. A complete cleaning of all rigging ends, pins, and cars can be added if the mast is going into storage. We provide a detailed report of our findings, including suggestions for any additional parts and work required.
At the Yacht Rigger we also offer a consultation service designed to assist you with both troubleshooting as well as with selection of any new rigging parts, from winches or furling gear, to a new mast, no job is too big or too small. Please visit our Contact Us page and get in touch so that we can assist you!Consult with us
We offer a fully mobile service covering all aspects of your sailboats rigging and deck hardware needs. Service areas including: Tampa Bay, St Petersburg, Madeira Beach, Indian Shores, Clearwater, Dunedin, Tarpon Springs, New Port Richey, Safety Harbor, Indian Rocks, St Pete Beach, Gulfport, Tierra Verde, Bradenton, Palmetto, Ruskin, Apollo Beach and most other City’s/Marina’s in the above regions.
We are fully licensed and insured to perform almost any rigging job on site, and we pride ourselves on showing up on time, and getting the job done right in as efficient a manner possible. Please view the Testimonials page for feedback from local sailors. We look forwards to seeing you on the dock!Consult with us
Servicing your winches regularly not only improves their longevity, but also greatly improves performance. Correctly cleaned and lubricated winches will operate faster, and require less force when grinding.
We can service all of your winches professionally, on site, in a matter of a few hours. We carry parts for most major brands and can source parts for almost any winch out there today.Consult with us
Our riggers are highly competent splicers, capable of splicing any line in a given application. From basic polyamide docklines, to covered Vectran, we can assist you in selecting the correct line for the correct application. Be it a weight saving halyard for a race boat, or a topping lift for a cruiser, look no further than TYR.Consult with us
At TYR we can supply all hardware relating to your mast and deck, for all brands of masts. Our team of expert riggers will guide you through getting the right equipment for your boat.
We supply many top of the line models of headsail furlers, including Selden Furlex and Harken. TYR can also provide servicing and spare parts for existing systems to ensure efficiency and reliability.
We supply a full range of blocks, clutches, cars and travelers from the leading brands Spinlock, Harken, Selden, and Ronstan. Be it a cruising boat wanting to maximize ease of use for all of running systems, or a high performance dinghy or racing yacht wanting to minimize weight, we will provide a product suited to your needs.Consult with us
If you’re considering replacing your sails or sail covers, please get in touch with us through our CONTACT US portal. Our team has decades of experience in both cruising and racing and we’ve partnered with the most talented and detail oriented sailmakers and canvas specialists in the Tampa Bay area to offer you a comprehensive sail replacement service.
Our sail replacement service includes:
Consultation – we’ll help you choose the sail material and cut that best suits your needs.
Measurement – if you fall within our service area we’ll come out to your boat and take precise measurements to make sure that your new sails perform optimally. We’ll also advise you regarding the variety of sail covers, mainsail storage systems, and sail furling systems available.
Installation – when your crisp new sails or sail covers are ready we’ll come out to your vessel and install them, to make sure they fit and perform exactly as needed.Consult with us
If you are looking to store your tender on your stern, we have you covered. From large stern arches to smaller davit systems. We’ve partnered with suppliers from across the US to bring you the most cost effective, aesthetically pleasing, and practical solutions to this complex issue. We can also supply fully integrated solar and wind systems on top of our stern arches that will get you off the grid and ready to go out into the big blue!Consult with us
We supply and install new windlasses, anchors, anchor chain, rode, and all the accessories in between. We can fabricate custom mounting platforms, install all the necessary switches, wiring, fuses, and additional batteries if needed.Consult with us
At The Yacht Rigger we offer a comprehensive marine electronics service that includes new system installation, existing system troubleshooting, parts replacement, new system integration or additions, new battery banks and much more. Let our partnered ABYC certified technicians come out to take a look at your electrical needs and we’ll make sure you have an efficient, well integrated system up and running in no time.Consult with us
If you are looking for marine grade solar or wind power we have you covered. From a single solar panel to an array of panels with wind generators tied in, we can get you off the grid and ready to go cruising. If needed, our skilled fabricators and hardware installation specialists can design and install an arch on your vessel on which to mount everything you need.Consult with us
If you are in the market to buy a sailboat, give us a call and ask about our pre-purchase consultation service. Far too many of our clients have purchased vessels that are either too much for them to handle or too small for their long term plans. We have decades of sailing and cruising experience, combined with decades in the field doing repairs and modifications and can certainly help you to make the right purchase, or at least set you in the right direction. We can also perform a pre-purchase rigging survey as most marine surveyors do not climb masts and therefore cannot tell you the true condition of your vessel’s rigging.Consult with us
At The Yacht Rigger we pride ourselves in offering top quality service, installation, and maintenance to a wide range of products and brands.
Our Online Store stocks brands Selden Furlex, Sta-lok, Mantus, Harken, Clean Tabs, Spectra, Waterline Design amount others. We are currently expanding the store so keep an eye out.