Installing small NMEA 2000® networks is quicker and easier than it’s ever been with the Self-contained Boat Network (SBN) from Actisense.
The equivalent of eight T-pieces in a single case provides a significant time and space saving with no more connecting multiple T-pieces together. Termination resistors are built in which increases the saving on time and space.
Once the attached 3 meter cable is connected to the boats power supply, an NMEA 2000 network for up to eight devices is ready to use, taking ‘plug & play’ to the next level.
Features:
Self-contained NMEA 2000 Network
Integrated Termination Resistors
8x NMEA 2000 drops
Ruggedized, flame retardant over-molded housing
Metal coupling nuts
Integrated EMI Shield
Orange, UL Rated, 3-meter power cable
Color coded wires, stripped and tinned
Low cost, quick to install, and provides an easy way to connect multiple NMEA 2000 devices
Simple installation, fewer components, more reliable, lower cost
Accommodates the vast majority of compact NMEA 2000 networks
Suitable for wet and harsh conditions- highly desirable in marine environments
Reliable, long lasting connections
Less likely to be susceptible to interference
UL rated cable provide peace of mind. Color easily differentiates the power cable form drop cables
Quick installation, no special tools required
Technical Specifications:
Electrical
Rated Current - 3A
Rated Voltage - 60 V (AC/DC)
Internal Termination Resistors - 2 x 120Ω 250mW
Mechanical
Female Contact - Phosphor bronze, gold plated
Contact Carrier - PA66 (30% Glass filled), black
Contact Polarization - Standard M12 – “A” – polarization
Mating Thread - M12
Screw Cap - Brass, nickel plated
O-Ring Seal - Rubber, black
Housing - TPU (Halogen Free) over Epoxy filled PBT housing
Flammability rating - UL94 V-0
Internal Housing Shield - Copper foil
Cable Jacket Material - 0.8mm Nom. PVC, orange
Cable Outer Diameter - 6.8mm
Cable Length - 3m
Wire Length - 150mm (10mm stripped and tinned)
Wire Jacket - PVC, Red & Black
Wires - 16 AWG (stripped and tinned)
Drain - 18 AWG (34 strand tinned copper)
Cable Shield - Al-mylar
Weight - 410g
Approvals and Certifications
Protection - IP67 (when mated)
Operating Temperature - -25°C to +70°C
Storage Temperature - -40°C to +85°C
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
So much better than the rubber ones I took off, easy install!
Spreader Boots
Daz Jensen
Where Have You Been All My Boating Life?
What a great little piece of tech - I don't know how we got by without it in the past. No more guessing how full the holding tank is or having to clean icky tank senders. This little bluetooth RADAR sending unit mounts on top of the tank and connects wirelessly to our Victron Cerbo.
Setup is super easy, push the button on the unit so it can calibrate to the tank then enable bluetooth and set up your rank dimensions on your Cerbo. It's as easy as that.
We've had it installed and running for about two weeks now and couldn't be more pleased (We like it enough that I ordered a second one for our water tank.)
Lots of wiring - no leaks! Be sure to run ALL the wires through BEFORE completing the run!
Seaview White Plastic Vertical Cable Seal f/Multiple Wires Up to 10.6mm/0.5"
Ari Storch
"Currently" super happy.
Installed on Yanmar 4JH57 engines with Zeus Controllers - HOLY WOW power. Losing some power at top end but overall very satisfied. Will do a long term review later. Talk about power - hope to never need my generator again!
