Use this bar to show information about your cookie policy.
Description
SLICKR 3-In-1 Ceramic Detailer
Super versatile Booster-Drying Aid-Topper & more features a Si02+polymer structure, hyper-slick finish, and fast hydrophobic results.
No. 150 Slickr Ceramic 3 in 1 quickly & easily adds hydrophobic water beading properties + a high gloss, hyper-slick finish to a variety of automotive exterior surfaces. With a SiO2-polymer structure, Slickr excels as both a stand-alone protectant or as a booster applied over any existing wax, sealant, or ceramic/graphene coating; enhancing shine & adding protection. Its versatility enables it to also be used as a drying aid, topper, clay lubricant, or as a final inspection detailer; removing light dust and smudges. Safe for paint, glass, wheels & trim.
Features:
Available in 16 fl oz
Average Spread/Coverage: 600-1,000 sq ft
TIPS: Always test the product first in a small, inconspicuous area to ensure the desired result.
As a lubricating drying aid: Following a wash while the vehicle surface is still wet-apply 2 sprays of Slickr to one 3×3 ft panel at a time. Using a microfiber towel, wipe the entirety of the panel until dry. Flip towels as necessary, and change towels as they become saturated. Repeat the process on all painted surfaces (and glass).
As a clay lubricant: Apply 2 sprays of Slickr directly onto a Colli-Flex Decon Towel (rubberized side). With minimal pressure, move the decon towel over a 3×3 ft panel in a cross-hatch, overlapping pattern. *Apply additional product to the surface to maintain slickness/lubrication and to avoid marring. Remove the product from the panel with a dry microfiber towel. Repeat the process on all painted surfaces (and glass).
Use:
Paint, glass, wheels, and trim
Extremely slick finish
Removes light dust, fingerprints, and smudges
Up to 3 months of hydrophobic
Easy wipe on wipe off high gloss shine
Clay lubricant, drying aid, show car prep
Topper over waxes, sealants, ceramic coatings, paint protection film
So much better than the rubber ones I took off, easy install!
Spreader Boots
Daz Jensen
Where Have You Been All My Boating Life?
What a great little piece of tech - I don't know how we got by without it in the past. No more guessing how full the holding tank is or having to clean icky tank senders. This little bluetooth RADAR sending unit mounts on top of the tank and connects wirelessly to our Victron Cerbo.
Setup is super easy, push the button on the unit so it can calibrate to the tank then enable bluetooth and set up your rank dimensions on your Cerbo. It's as easy as that.
We've had it installed and running for about two weeks now and couldn't be more pleased (We like it enough that I ordered a second one for our water tank.)
Lots of wiring - no leaks! Be sure to run ALL the wires through BEFORE completing the run!
Seaview White Plastic Vertical Cable Seal f/Multiple Wires Up to 10.6mm/0.5"
Ari Storch
"Currently" super happy.
Installed on Yanmar 4JH57 engines with Zeus Controllers - HOLY WOW power. Losing some power at top end but overall very satisfied. Will do a long term review later. Talk about power - hope to never need my generator again!
