Receive News, product promotions & gifts
Use this bar to show information about your cookie policy.
Re-Arm Kit U 12G Manual 3/8" Threads
Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 12-gram CO2 cylinder with 3/8" threads, a green pin, and step-by-step re-arming instructions. Make sure to check your inflatable life jacket’s owner’s manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.
Features:
CAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.
WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.
WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.
Sign up for monthly news and promotions
200 14th Avenue Southeast, St. Petersburg, FL 33701
7C San Bartola Drive, Saint Augustine, FL 32086




Installed on Yanmar 4JH57 engines with Zeus Controllers - HOLY WOW power. Losing some power at top end but overall very satisfied. Will do a long term review later. Talk about power - hope to never need my generator again!
We bought these boots in 2022, and are buying new ones 3 years later. We love the design and the fact that they are easy to remove for inspection of the rig.
Review for electrical system components:
• Victron Lithium Battery 24VDC 300Ah NG Smart LifePO4 (x4)
• Victron Lynx Smart BMS 500 NG (M10)
• Victron Lynx Distributor w/M10 Terminals (x2)
• Victron MultiPlus-II 24/5000 120-95 120V (x2)
• Victron Phoenix Smart IP43 Charger 24/25 (1+1) 120-240VAC (x5)
• Victron Cerbo GX MK2 w/ Victron GX Touch 70 Flush Mount Display
• Z Bar - Class T battery link Bundle w/ Blue Sea 5119 300AMP Class T Fuse (x4)
• Victron Orion XS 1400 DC-DC Battery Charger (x2)
• Victron SmartSolar MPPT Charge Controller - 100V - 30AMP - UL Approved (x4)
Complete upgrade of my Irwin 54 Sloop electrical system –
Phase 1 – Remove 9KW generator, install 30KW LifePO4 battery system, inverter chargers, battery chargers, etc. wired for worldwide shore power capability to ABYC standards. Installation made possible with guidance and support from Andre Cormier and The Yacht Rigger.
I was amazed with the product especially, the attention to detail. I was also very pleased with the help and recommendations I received from Chris Wilcher. He made the purchase very easy.
I was very pleased with the product especially, the attention to detail. I was also pleased with the support I received from Chris Wilcher. He made the purchase very easy.

