Use this bar to show information about your cookie policy.
Description
BattMan Lite Battery Monitor - 12/24V
Battery monitor, 12/24 V DC with large, splash-proof display (IP65) and power bar.
An affordable battery monitor that does exactly that: providing critical information about the status of your battery bank under all circumstances. Moreover, it will warn you when your battery bank is empty.
General Specifications:
Number of battery outlets: 2; service (fully), starter (voltage)
Display/read-out: Voltage, current, amp-hours, battery capacity in %
Languages on display: Universal
Built-in depth: 72.5 mm/2.9 inch
Dimensions: Ø 64 mm, depth 79 mm
Dimensions shunt, hxwxd: 87 x 45 x 35 mm/3.4 x 1.8 x 1.4 inch
Weight: 0.15 kg/0.3 lb
Technical Specifications:
Max. Ah capacity: 9999 Ah
Supply voltage: 9-35 V
Voltage range: 0-35 V
Current consumption (backlight off): 8 mA/12 V, 6 mA/24 V
Current consumption (backlight on): 30 mA/12 V, 18 mA/24 V
Voltage resolution: 0.1 V
Voltage accuracy: ± 0.3%
Shunt specification: 500 A/50 mV (service set)
Current measurement range: 0-500 A
Current accuracy: ± 0,4 %
Battery alarm contact: Yes, potential free
Remaining time indication: No
Historical data: No
MasterBus compatible: No
Connection cable (6-wire) necessary: Yes
Modular cable necessary: No
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
So much better than the rubber ones I took off, easy install!
Spreader Boots
Daz Jensen
Where Have You Been All My Boating Life?
What a great little piece of tech - I don't know how we got by without it in the past. No more guessing how full the holding tank is or having to clean icky tank senders. This little bluetooth RADAR sending unit mounts on top of the tank and connects wirelessly to our Victron Cerbo.
Setup is super easy, push the button on the unit so it can calibrate to the tank then enable bluetooth and set up your rank dimensions on your Cerbo. It's as easy as that.
We've had it installed and running for about two weeks now and couldn't be more pleased (We like it enough that I ordered a second one for our water tank.)