Use this bar to show information about your cookie policy.
Description
OceanConnect Junction Box
The OceanConnect is a waterproof (IP66) DMX-controlled, low-voltage DC (9–32V) junction box.
The OceanConnect provides one power unit and four individually switched fused power outputs (6 amps per output) to connect DC-powered lights or other DC-switched units. The unit also supports powering and individual addressing of up to four DMX-controlled OceanLED X-Series lights.
Contents:
1x OceanConnect unit, including 4x 7.5A blade fuses
4x mounting screws
1x twin entry cable grommet
4x blanking plugs
Specifications:
Voltage: 12/24V DC (max 32V DC)
Input/Output Cable Glands: 1x M20-Power In, 4x M16 - DMX In/Out, and Lights Out
Power Input Terminals Wire Gauge: 8-20 AWG
DMX In/Out, and Lights Out Terminals Wire Gauge: 12-28 AWG
Light Outputs: DMX & Power- 4 x individual fused 6 Amp each max
DMX Input: 1x DMX Input (to connect the DMX controller)
DMX Output: 1x DMX Output (to link junction boxes in the chain)
DMX Terminator: Onboard DMX terminator with an on/off switch
Physical Specifications
Dimensions (Including Cable Glands): 228mm x 174mm x 60mm (9" x 6.8" x 2.3")
So much better than the rubber ones I took off, easy install!
Spreader Boots
Daz Jensen
Where Have You Been All My Boating Life?
What a great little piece of tech - I don't know how we got by without it in the past. No more guessing how full the holding tank is or having to clean icky tank senders. This little bluetooth RADAR sending unit mounts on top of the tank and connects wirelessly to our Victron Cerbo.
Setup is super easy, push the button on the unit so it can calibrate to the tank then enable bluetooth and set up your rank dimensions on your Cerbo. It's as easy as that.
We've had it installed and running for about two weeks now and couldn't be more pleased (We like it enough that I ordered a second one for our water tank.)
