Description
PSS Shaft Seal 1-1/2" Shaft 2-1/2" Tube
Shaft Diameter: 1-1/2"
Stern Tube Diameter (D): 2-1/2" to 2-5/8"
Total Length (A): 9.175"
Total Length (compressed) (Compressed A): 8.175"
Rotor Diameter (B): 3.75"
Carbon Cuff Diameter (C): 3.25"
Stern Cuff Length (E): 2"
The PSS Shaft Seal is the number one selling marine mechanical seal worldwide and is installed as standard equipment by many of the worlds most reputable boat builders / yards. The PSS Shaft Seal is also recognized as the premiere retrofit (aftermarket) seal on the world market. Certified by Bureau Veritas, ABS & Rina: Boat builders / yards recognize the advantages and value of installing the PSS as it eliminates the maintenance, constant adjustment & cost associated with traditional packing type glands. Aside from these benefits, the PSS Shaft Seal helps to eliminate water in the bilge (100% water tight) & wear to the propeller shaft. The PSS Shaft Seal can be easily retrofitted and is available for shafts ranging from 3/4" (20mm) to 6" (150mm).
The PSS Shaft Seal is a mechanical face seal that is created between the flat surfaces of the rotating stainless steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the vessels stern tube with hose clamps and the carbon flange is attached to the front side of the bellows with hose clamps. The stainless steel rotor is fit on the shaft in front of the carbon flange. The stainless steel rotor is used to compress the bellows before the collar is secured to the shaft with set-screws. This compression (pre-load) maintains contact between the faces and allows the PSS to compensate for the thrust from the propeller. The carbon flange is bored larger than the shaft diameter allowing it to "float" around the shaft and thus compensate for most misalignment and vibration problems. The stainless steel collar is sealed to the shaft by two o-rings that are recessed into the bore of the collar. These o-rings rotate with the shaft and stainless steel rotor and do not experience wear during operation.
**As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. PYI suggests as preventative maintenance that the PSS bellow be replaced in six year intervals. During bellows replacement it is recommended the o-rings & set screws in the stainless steel rotor also be replaced."
Bellows may need to be more frequently inspected in an environment where non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate rubber deterioration, as will an ozonater.
The Maintenance Kit includes the items you need to properly maintain your PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings, five (5) set screws, four (4) new hose clamps and an allen key.
Brochure (pdf)
Estimate shipping
Refund Policy
Easy Returns
We've taken out the hassle of returning an item so you can shop with confidence. If you need to return an item, we'll provide you with a pre-paid UPS return label that you can print at home. The cost for using the label will be calculated and deducted from your refund.
To start a return, please contact us at sales@theyachtrigger.com Items sent back to us without first requesting a return will not be accepted.
30-Day Return Policy
We have a 30-day return policy, meaning you have 30 days after receiving your item to request a return or exchange.
Eligibility for Returns
To be eligible for a return, your item must be in the same condition that you received it—unworn or unused, including tags, instruction manuals, warranty cards, and in its original packaging. You’ll also need the receipt or proof of purchase.
We reserve the right to refuse returns or assess additional fees at our discretion if:
-
The merchandise is missing parts
-
The item is not in new condition
-
The return is beyond the accepted return dates
Return Shipping & Restocking Fees
Customers are responsible for return shipping.
If you request The Yacht Rigger to provide a shipping tag, the shipping cost will be deducted from your refund. No international return shipping labels will be provided.
A 3% restocking fee will apply.
No returns on final sale items.
Damages and Warranties
Please inspect your order upon receipt and contact us immediately if the item is defective, damaged, or if you received the wrong item.
Most items we sell are covered by manufacturers' warranties. If you experience difficulty with a product, please contact the appropriate manufacturer for assistance and troubleshooting help, or email us at sales@theyachtrigger.com . If your order was received via freight truck, you must notify us within 5 days.
Exceptions / Non-Returnable Items
Certain types of items cannot be returned, such as custom products and special orders. This includes cut line, wire, rope, and similar items that are customized to length. We also do not accept returns for hazardous materials, flammable liquids, or gases. Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to request a return of the item you have. Once the return is accepted, you can make a separate purchase for the new item to ensure it is in stock.
European Union 14-Day Cooling Off Period
If the merchandise is being shipped to the European Union, you have the right to cancel or return your order within 14 days, for any reason and without justification. As above, your item must be in the same condition that you received it—unworn or unused, with tags, instruction manuals, warranty cards, and in its original packaging. You’ll also need the receipt or proof of purchase.
Refunds
We will notify you once we’ve received and inspected your return and inform you if the refund was approved. When processing a refund, no additional transaction fee is incurred; however, the original credit card transaction fee is not refunded.
If approved, you’ll automatically be refunded to your original payment method within 10 business days. Please allow some time for your bank or credit card company to process and post the refund. If more than 15 business days have passed since we’ve approved your return, please contact us at sales@theyachtrigger.com
Return Policy Abuse
We reserve the right to refuse service to anyone suspected of abusing any policy of The Yacht Rigger.





