Use this bar to show information about your cookie policy.
Description
Random Orbital Polisher Bigfoot Duetto (Tool Only)
All-in-one sanding and polishing system for painted surfaces. Duetto is equally effective when working with soft or interface backing pads, teamed with micro-abrasives during the defect correction step, or with foam polishing pads and compounds during the polishing stage. Extensive research on random orbital dynamics and exhaustive testing led to the selection of a 12mm orbit for Duetto. This orbit length greatly improves the surface rectification abilities of the latest generation of microabrasive discs. The combination of duetto and microabrasives is especially effective when smoothing orange peel or significant defects. The finish generated by this combination is both homogeneous and predictable, with no deep sanding marks.
The use of microabrasive discs to correct severe defects creates a surface that is easily polished, radically reducing the overall time of the full correction process. Duetto is so well balanced and low in vibration that the operator can easily control the sanding step by simply guiding duetto over the surface. The ability of the operator to control the tool so efficiently minimizes the chances of creating rough and uneven surfaces that require time-consuming rework.
Duetto has several design features that make it uniquely operator friendly.The anti-spinning device reduces the chances of operator error even for a novice technician. The front hand grip allows the operator to place his/her hand at the virtual balance center of the tool and keeps vibration to a minimum.
The electronic module has built-in torque control, reducing the need for the operator to apply significant downward vertical pressure. Another unique duetto feature is the rubber support that allows the operator to place duetto on a workbench without the abrasive disc touching a surface that might contain contaminants that could transfer to the workpiece during the sanding process. Compatible with microabrasive discs and the appropriate 5” interface pad.
*Random orbital polisher (Ø125mm - Ø5”-12mm orbit) (LHR12E)
Installed on Yanmar 4JH57 engines with Zeus Controllers - HOLY WOW power. Losing some power at top end but overall very satisfied. Will do a long term review later. Talk about power - hope to never need my generator again!
ARCO Zeus A8000 48V High Output Alternator - Isolated Ground
Magalie Laniel
Great design but fail fast in the caribbean sun...
We bought these boots in 2022, and are buying new ones 3 years later. We love the design and the fact that they are easy to remove for inspection of the rig.
Spreader Boots
Jon
Victron
Review for electrical system components:
• Victron Lithium Battery 24VDC 300Ah NG Smart LifePO4 (x4)
• Victron Lynx Smart BMS 500 NG (M10)
• Victron Lynx Distributor w/M10 Terminals (x2)
• Victron MultiPlus-II 24/5000 120-95 120V (x2)
• Victron Phoenix Smart IP43 Charger 24/25 (1+1) 120-240VAC (x5)
• Victron Cerbo GX MK2 w/ Victron GX Touch 70 Flush Mount Display
• Z Bar - Class T battery link Bundle w/ Blue Sea 5119 300AMP Class T Fuse (x4)
• Victron Orion XS 1400 DC-DC Battery Charger (x2)
• Victron SmartSolar MPPT Charge Controller - 100V - 30AMP - UL Approved (x4)
Complete upgrade of my Irwin 54 Sloop electrical system –
Phase 1 – Remove 9KW generator, install 30KW LifePO4 battery system, inverter chargers, battery chargers, etc. wired for worldwide shore power capability to ABYC standards. Installation made possible with guidance and support from Andre Cormier and The Yacht Rigger.
Victron Lithium Battery 24VDC 300Ah NG Smart LifePO4
Lacy Bryan White
Great Product!
I was amazed with the product especially, the attention to detail. I was also very pleased with the help and recommendations I received from Chris Wilcher. He made the purchase very easy.
Apex Turnbuckle
Lacy Bryan White
Quality Part
I was very pleased with the product especially, the attention to detail. I was also pleased with the support I received from Chris Wilcher. He made the purchase very easy.