Use this bar to show information about your cookie policy.
Description
12A Non-Isolated Step-Down 24VDC-12VDC Converter
This high efficiency switch-mode step-down DC-DC converter converts an input voltage of 24 VDC nominal (range 20 VDC to 32 VDC) to a highly regulated output voltage of 12 VDC nominal (13.8 VDC) at 12 Amps. The SDC-12 DC-DC converter is non-isolated (no galvanic isolation between input and output) and meant for use in negative ground systems. Features include short-circuit, reverse polarity and over-voltage protection.
Features:
Advanced switchmode design
Mount in almost any location
Compact and light weight
Reverse polarity protection
High efficiency
Cycle by cycle current limiting circuit
Overvoltage protection
Short circuit protection
Specifications:
Input: 20-32 VDC
Output: 13.8 VDC
Amps: 12 Amps
Weight: 1 (lbs)
Weight: 0.45 (kg)
Dimensions: 4 x 3.5 x 2 (in)
Dimensions: 10.2 x 8.9 x 5.1 (cm)
Warranty: 2 Year Limited
Applications:
Earth moving equipment
Heavy trucks
Buses
Marine vehicles
CB radios
12 Volt lighting systems
AM/FM sound systems
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Excellent choice - easy to install using existing wiring and switches. No need for separate controllers for dimming and colors!
Lumitec Orbit Flush Mount Down Light - Blue Non-Dimming, Red Non-Dimming White Dimming w/White Housing
Matthew Chachere
Excellent advice
I haven't installed yet, but Mike and Andre at The Yacht Rigger have been nothing short of excellent and patient in answering my numerous questions pertaining to my project of converting my house bank to LiFePo. Will be starting on the install shortly (which will include the installation of two Class T 400A fuses as well as other items purchased from TYR).
Blue Sea 5121 400AMP Class T Fuse
Jon
Complete Order
This is a review for my complete order of 2/0 AWG Battery Cable Red and Yellow, the Victron BMV-712 Black Smart Battery Monitor, 2 ea Blue Sea 5191 Terminal Fuse Block 30-300AMP with 2 ea Blue Sea 5189 250A Fuse Terminal and 5190 Blue Sea 5190 300A Fuse Terminal (1 installed, 1 standby), and 1 Egis XD Series Single Flex 2 Relay-ACR. All installed by me as directed by The Yacht Rigger electrical experts. New dual starter battery installation was smooth and easy. Works like a champ with no issues! This is the first time since I owned this boat that I can see the stater battery condition!
Victron BMV-712 Black Smart Battery Monitor
Jon
Complete Order
This is a review for my complete order of 2/0 AWG Battery Cable Red and Yellow, the Victron BMV-712 Black Smart Battery Monitor, 2 ea Blue Sea 5191 Terminal Fuse Block 30-300AMP with 2 ea Blue Sea 5189 250A Fuse Terminal and 5190 Blue Sea 5190 300A Fuse Terminal (1 installed, 1 standby), and 1 Egis XD Series Single Flex 2 Relay-ACR. All installed by me as directed by The Yacht Rigger electrical experts. New dual starter battery installation was smooth and easy. Works like a champ with no issues!
Pacer Yellow 2/0 AWG Battery Cable - 50
Conan Disney
Easy install and fast charging
Arco A 275 alternator is almost a perfect fit on a yanmar 4jh3e. Installed with balmar pulley kit . Easy install and fast charging .n more belt dust covering everything.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
