Use this bar to show information about your cookie policy.
Description
GO GPS Receiver
All your boat’s data close to your finger tips. Veratron GO is NMEA 2000® certified and features an integrated GPS/GLONASS/GALILEO receiver. Compact and easy to install, it does not require any additional protection against harsh weather conditions. One of the smallest GPS receivers available.
The Veratron GO GPS Receiver works in conjunction with the Veratron Go Data.
Features:
72 channel receiver
Fast cold-start position fix
Compatible with OceanLink 52MM Bezels
10Hz update rate
Up to 3 concurrent GNSS systems (GPS, GLONASS and GALILEO)
SBAS – WAAS/EGNOS/MSAS/GAGAN supported
NMEA 2000 standard PGNs transmitted for position, time, speed and heading
Front-end SAW band-pass filter for enhanced immunity against electrical noise
Interchangeable bezel option
Technical Specifications:
Update Rate: Up to 10Hz using concurrent GNSS, up to 18Hz using single GNSS
Position Fix Time: 26 second cold-start, 1 second hot start
Tracking Sensitivity: -165dBm
Position Accuracy: 2.5m
Velocity Accuracy: 0.05m/s
Heading Accuracy: 0.3°
Water Resistance: IPX7
Dimensions (D x H): 60.7 mm x 18.9 mm
Power Source: NMEA 2000 backbone (12V nominal voltage), no external power supply required
Power Consumption: 100mA (2 LEN) operational, 150mA (3 LEN) during startup
In the Box:
GO GPS Receiver
Instructions Manual
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Installed on Yanmar 4JH57 engines with Zeus Controllers - HOLY WOW power. Losing some power at top end but overall very satisfied. Will do a long term review later. Talk about power - hope to never need my generator again!
ARCO Zeus A8000 48V High Output Alternator - Isolated Ground
Magalie Laniel
Great design but fail fast in the caribbean sun...
We bought these boots in 2022, and are buying new ones 3 years later. We love the design and the fact that they are easy to remove for inspection of the rig.
Spreader Boots
Jon
Victron
Review for electrical system components:
• Victron Lithium Battery 24VDC 300Ah NG Smart LifePO4 (x4)
• Victron Lynx Smart BMS 500 NG (M10)
• Victron Lynx Distributor w/M10 Terminals (x2)
• Victron MultiPlus-II 24/5000 120-95 120V (x2)
• Victron Phoenix Smart IP43 Charger 24/25 (1+1) 120-240VAC (x5)
• Victron Cerbo GX MK2 w/ Victron GX Touch 70 Flush Mount Display
• Z Bar - Class T battery link Bundle w/ Blue Sea 5119 300AMP Class T Fuse (x4)
• Victron Orion XS 1400 DC-DC Battery Charger (x2)
• Victron SmartSolar MPPT Charge Controller - 100V - 30AMP - UL Approved (x4)
Complete upgrade of my Irwin 54 Sloop electrical system –
Phase 1 – Remove 9KW generator, install 30KW LifePO4 battery system, inverter chargers, battery chargers, etc. wired for worldwide shore power capability to ABYC standards. Installation made possible with guidance and support from Andre Cormier and The Yacht Rigger.
Victron Lithium Battery 24VDC 300Ah NG Smart LifePO4
Lacy Bryan White
Great Product!
I was amazed with the product especially, the attention to detail. I was also very pleased with the help and recommendations I received from Chris Wilcher. He made the purchase very easy.
Apex Turnbuckle
Lacy Bryan White
Quality Part
I was very pleased with the product especially, the attention to detail. I was also pleased with the support I received from Chris Wilcher. He made the purchase very easy.