The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in the workshop and motor vehicles, such as (classic) cars; motorbikes; boats, and camper vans.
The battery is charged, smartly... to the perfect condition
The seven-step charging algorithm gets the best out of a battery. The charger gives the battery the power it needs, maintains its health, and ensures better performance... and longer life.
Recovery of deeply-discharged 'dead' batteries
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Regular charging will then be resumed as soon as sufficient voltage is across the battery terminals.
Connect the battery with ease
The charger comes with both crocodile clips and M8 eyelets - making it easy to connect to the battery. If users wish, it can be left permanently connected.
Check the status of your battery remotely
The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet, or laptop. All settings of the charger can be configured with the VictronConnect app.
Specifications:
Input Voltage & Frequency Range: 100 - 250VAC | 45 - 65Hz
Efficiency: 82%
Standby Power Consumption: <0,5 W
Minimum Battery Voltage: Starts charging from down to 0 V
Charge voltage 'absorption': Normal: 7,2 V | 14,4 V / High: 7,35 V | 14,7 V / Li-ion: 7,1 V | 14,2 V
Charge Voltage 'float': Normal: 6,9 V | 13,8 V / High: 6,9 V | 13,8 V / Li-ion: Disabled
Charge Voltage 'storage': Normal: 6,6 V | 13,2 V / High: 6,6 V | 13,2 V / Li-ion: 6,75 V | 13,5 V
Charge Current: 1.1 A
Low-Current Mode: 0,5A
Temperature Compensation (lead-acid batteries only): 8 mV/°C | 16 mV/°C
Power Supply Mode: Yes
Back Current Drain: 0,1 Ah/month (140uA)
Protection: Reverse polarity, Output short circuit, Over-temperature
Operating Temp. Range: -30 to +50°C (full rated output up to 30°C)
Humidity (non-condensing): Max 95%
Charge Algorithm: 7-stage adaptive
Bluetooth: 4dBm, 2402–2480 MHz
Enclosure Specifications:
Battery-Connection: Black and red cable of 1,5 meter
230V AC connection: 1.5m cable with CEE 7/16 or AS/NZS 3112 plug
Protection Category: IP65 (splash and dust proof)
Weight: 0,4 kg
Dimensions: 38 x 64 x 153 mm
Standards:
Safety: EN 60335-1, EN 60335-2-29
Emission; EN 55014-1, EN 61000-6-3, EN 61000-3-2
Immunity: EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
So much better than the rubber ones I took off, easy install!
Spreader Boots
Daz Jensen
Where Have You Been All My Boating Life?
What a great little piece of tech - I don't know how we got by without it in the past. No more guessing how full the holding tank is or having to clean icky tank senders. This little bluetooth RADAR sending unit mounts on top of the tank and connects wirelessly to our Victron Cerbo.
Setup is super easy, push the button on the unit so it can calibrate to the tank then enable bluetooth and set up your rank dimensions on your Cerbo. It's as easy as that.
We've had it installed and running for about two weeks now and couldn't be more pleased (We like it enough that I ordered a second one for our water tank.)
Lots of wiring - no leaks! Be sure to run ALL the wires through BEFORE completing the run!
Seaview White Plastic Vertical Cable Seal f/Multiple Wires Up to 10.6mm/0.5"
Ari Storch
"Currently" super happy.
Installed on Yanmar 4JH57 engines with Zeus Controllers - HOLY WOW power. Losing some power at top end but overall very satisfied. Will do a long term review later. Talk about power - hope to never need my generator again!
