Use this bar to show information about your cookie policy.
Description
BlueSmart IP65 Charger 12/25 (1) 120V NEMA 1-15P UL Approved
The Blue Smart IP65 Charger is the new professional battery charger with built-in Bluetooth. The Blue Smart IP65 Charger can be used on devices in the workshop and on motor vehicles, such as classic cars, motorbikes, boats, and campervans.
The Battery Is Charged, Smartly... To Perfect Condition
The seven-step charging algorithm gets the most out of a battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and gives it a longer life.
Recovery of Deeply-Discharged ‘Dead’ Batteries
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Connect the Battery with Ease
The charger comes with both crocodile clips and M8 eyelets, making it easy to connect to the battery. If users wish, they can leave it permanently connected.
Check the Status of the Battery Remotely
The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet, or laptop. All settings of the charger can be configured with the VictronConnect app.
Specifications:
Input Voltage: 120 VAC
Efficiency: 94%
Standby Power Consumption: 0.5W
Minimum Battery Voltage: Starts charging from down to 0V
Charge Voltage 'Absorption': Normal: 14.4V High: 14.7V Li-ion: 12.4V
Charge Voltage 'Float': Normal: 13.8V High: 13.8V Li-ion: 13.5V
Charge Voltage 'Storage': Normal: 13.2V High: 13.2V Li-ion: 13.5V
Charge Current: 25A
Temperature Compensation (Lead-Acid Batteries Only): 16 mV/degrees C (18mV/degrees F
Can Be Used as Power Supply: Yes
Back Curreny Drain: 0.7Ah/month (1mA)
Protection: Reverse polarity; Output short circuit; Over temperature
Operating Temp. Range: -40 to +60 degrees C (full rated output up to 30 degrees C) -40 to +140 degrees F (full rated output up to 90 degrees F)
Humidity (non-condensing): Max 95%
Enclosure Specifications:
Battery-Connection: Black and red cable of 1.5 meters (4.9 feet)
120 V Ac-Connection: Cable of 1.8 meters (5.9 feet) with US NEMA 1-15 plug
Protection Category: IP65 (splash and dust proof, and ignition protected)
Weight: 0,9kg (2lbs)
Dimensions (H x W x D): 12/25: 60 x 105 x190mm 2.3 x 4.1x 7.5 inches
Standards:
Safety: UL 1236, CSA C22.2, EN 60335-1, 60335-2-29
Emission: EN 55014-1, EN 61000-6-3, EN 61000-3-2
Immunity: EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3
Please contact your dealer for any returns, repairs or support issues related to this product.
So much better than the rubber ones I took off, easy install!
Spreader Boots
Daz Jensen
Where Have You Been All My Boating Life?
What a great little piece of tech - I don't know how we got by without it in the past. No more guessing how full the holding tank is or having to clean icky tank senders. This little bluetooth RADAR sending unit mounts on top of the tank and connects wirelessly to our Victron Cerbo.
Setup is super easy, push the button on the unit so it can calibrate to the tank then enable bluetooth and set up your rank dimensions on your Cerbo. It's as easy as that.
We've had it installed and running for about two weeks now and couldn't be more pleased (We like it enough that I ordered a second one for our water tank.)
Lots of wiring - no leaks! Be sure to run ALL the wires through BEFORE completing the run!
Seaview White Plastic Vertical Cable Seal f/Multiple Wires Up to 10.6mm/0.5"
Ari Storch
"Currently" super happy.
Installed on Yanmar 4JH57 engines with Zeus Controllers - HOLY WOW power. Losing some power at top end but overall very satisfied. Will do a long term review later. Talk about power - hope to never need my generator again!
