Use this bar to show information about your cookie policy.
Description
Industrial Kit with AT-8040 Adhesive
This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For Industrial Maintenance Shops. A Wide Selection Of Weld Mount Parts Are Supplied In A Heavy "Durham" Metal Box Which Is A Standard Rack Mounted System. The Kit Contains 1 Tubes Of Our AT-8040 No Slide Multi Bonder Acrylic Adhesive Which Will Bond To Almost All Surfaces Except Low Energy Plastics And Rubber. AT-8040 Will Hold Even Our Heaviest Parts On An Overhead Or Vertical Surface Without Fixturing. The Adhesive Sets in 12 Minutes And Is Heat Resistant To 225 Degrees. The Adhesive Should Be Refrigerated and Has A Shelf Life Of 1 year.
The Weld Mount System Eliminates The Need To Drill And Tap, or Weld When Used On Metal Surfaces. Great for Mounting Wire and Conduit Runs, Electrical Boxes And Other Structural Applications.
The AT-7001 Kit Contains:
(1) AT-8040 - No Slide Multi Bonder Adhesive With 12 Minute Kick
(10) AT-850 - 3.5" Mixing Tips For AT-8040 Adhesive
(1) AT-300 - Adhesive Dispensing Gun
(30) AT-3B - Small Black Cable Tie Mount
(100)tAT-5B - Large Black Cable Tie Mount
<(25) AT-5 - Large White Cable Tie Mount
(25) AT-7 - Aluminum Base Swivel Wire Tie Mount
(25) AT-9 - Aluminum Wire Tie Mount
(2) AT-113 - Large Footman's Strap White
(2) AT-113B - Large Footman's Strap Black
(6) ST125-1420-12SS - 0.75" Long Stud With 1/4 x 20 Threads 1.25" Base
(6) ST125-1420-16SS - 1.00" Long Stud With 1/4 x 20 Threads 1.25" Base
(6) ST125-1024-12SS - 0.75" Long Stud With #10 x 24 Threads 1.25" Base
(6) ST125-1024-20SS - 1.25" Long Stud With #10 x 24 Threads 1.25" Base
(2) SHC-1000 - Single Hose Clamp 1.00"
(2) DHC-1000 - tDouble Hose Clamp 1.00"
(1) Storage Box - Durham Manufacturing 18.5' x 12.5" x 3.25"
Arco A 275 alternator is almost a perfect fit on a yanmar 4jh3e. Installed with balmar pulley kit . Easy install and fast charging .n more belt dust covering everything.
ARCO Zeus A275L Alternator
Conan Disney
Providing a lot of power.
3@405 watt rec panels on top of Bimini with 2@ Hyundai bifacials on top of Atlantic tower. 1x2 “ anodised aluminum used for supports . Each panel has their own mppt charge controller due to the amount of Shade on my sailboat.panels are providing a lot of power.
REC Alpha Pure – 405w Solar panel
Conan Disney
ARCO Zeus regulator is performing great.
Instalation instructions where easy to follow.
The Zeus can be adjusted with the app to adjust the charging parameters.
Enclosed picture of gx device show a lot of solar going into batteries so the Zeus is providing enough amps to max out 300 amps going into batteries. If I was using more ac devices the alternator will increase output . Temperature sensor included with Zeus allows it to reduce output until alternator cools down.
ARCO Zeus Alternator Regulator- Standard
Conan Disney
Cools boat down quickly
Mabru air conditioner is great improvement from my old model. Cools boat down quickly. Easy install. I run this 17k unit of my 12/100/3000 ,victron invertor. Sometimes the solar panels will provide enough power for air conditioner ,2 fridges and all other loads.
MARINE AIR CONDITIONER SC17VI 17000 BTU 115/230v Self-Contained BY MABRU
Conan Disney
Modular Rainman watermaker installed in separate locations
Modular Rainman watermaker installed in separate locations. The motor and pump fit well under nav table seat ,membranes fit below forward bed. I made 80 gallons of water whilst motoring into port royal sound s.c. My victron 12/120/3000 invertor had no trouble running it .
The water produced was 200ppm. About the same as my city water filtered through Brita pitcher.
