Use this bar to show information about your cookie policy.
Description
Our Z bar kit allows you to connect directly to the battery top, fulfilling the ABYC 7” rule. This saves on installation time and gets you fused right at the battery.
Not all batteries are created equal, and the slotted base plate allows you to position the Z bar for perfect surface contact between the Z bar, battery terminal, and class T fuse holder.
To secure the base plate to the battery, the plate is equipped with 3M VHB tape. In addition, there is a slot to allow for a battery strap to secure it to the battery.
Please note: This kit does not include a Class T fuse, as the required fuse rating depends on your specific application.
This product is manufactured in-house until sales volume warrants contract manufacturing. Tooling marks may be present, and 3D-printed parts have been used. The product is fully functional.
Parts included:
Class T fuse holder (225-400amp Class T fuse)
Two slotted base plate halves with thru bolts and VHB
My original lithium installer did not install Class-T fuses so I needed to - searching for the best way to protect my boat I am so happy I came across these - PERFECT option - allows for significant adjustment and solid contact. They even thought of a red cover cover for the hot terminal (I cut it open and used a zip tie to keep it on - much easier than “threading” it on and trying to tighten the bolt). Quality product and I feel so much better have the proper fuses on my terminals.
Thank you for taking the time to leave a review for our Z Bar - Class T battery link Bundle. We're glad to hear that you are satisfied with your purchase and that it provided a perfect solution for protecting your boat. We're happy that you found the red cover for the hot terminal to be convenient and easy to use. We take pride in providing quality products and we appreciate your feedback. Make sure to check out our YouTube videos for more electrical finds. Thank you for choosing our product!
J
Josh G
Innovative, quality product!
The Z Bar Class T Fuse Holder solves a real problem, and does so in a simple and affordable way.
Thank you for your kind review of our Z Bar Class T battery link Bundle! We are delighted to hear that you find our product innovative and of high quality. Our team works hard to provide solutions to real problems in a simple and cost-effective manner. We truly appreciate your support and hope to continue exceeding your expectations in the future. Have a great day!
So much better than the rubber ones I took off, easy install!
Spreader Boots
Daz Jensen
Where Have You Been All My Boating Life?
What a great little piece of tech - I don't know how we got by without it in the past. No more guessing how full the holding tank is or having to clean icky tank senders. This little bluetooth RADAR sending unit mounts on top of the tank and connects wirelessly to our Victron Cerbo.
Setup is super easy, push the button on the unit so it can calibrate to the tank then enable bluetooth and set up your rank dimensions on your Cerbo. It's as easy as that.
We've had it installed and running for about two weeks now and couldn't be more pleased (We like it enough that I ordered a second one for our water tank.)
Lots of wiring - no leaks! Be sure to run ALL the wires through BEFORE completing the run!
Seaview White Plastic Vertical Cable Seal f/Multiple Wires Up to 10.6mm/0.5"
Ari Storch
"Currently" super happy.
Installed on Yanmar 4JH57 engines with Zeus Controllers - HOLY WOW power. Losing some power at top end but overall very satisfied. Will do a long term review later. Talk about power - hope to never need my generator again!
